Interior Metal Office Partitions and Screens | Techno Kol Uzi

t503-45

An interior metal office partition is a room divider built from a steel or aluminum frame, often combined with glass or perforated panels, that separates work zones while keeping light and sightlines open. Made to measure in the factory, it can be designed to match the ceiling grid, floor finish and the overall office style.

What an interior metal office partition is

An interior metal office partition is a fixed or semi-fixed divider that defines rooms, meeting areas and corridors without solid walls. The structure is typically steel or aluminum profile, which allows slim sightlines and a precise, architectural look. Infill can be clear or frosted glass, perforated sheet, expanded metal or solid panels, depending on the acoustic and privacy needs of the space.

Compared with drywall, metal framing offers greater rigidity for tall panels and large spans, and it integrates well with glazed doors and openings.

Types of partitions and screens we design

Designers usually choose between a few common configurations, each suited to a different brief:

Full-height glazed partitions with slim steel or aluminum frames
Half-height screens for open-plan zoning and reception areas
Perforated or expanded metal screens for filtered visibility
Sliding or hinged doors integrated into the partition system
Decorative screens with custom patterns or cut-out logos

Each type can be finished in matt black, brushed stainless or powder-coated colors to suit the interior palette.

Design considerations for architects and designers

Before drawing a partition, confirm the ceiling and floor conditions, the fire and acoustic requirements of the project and the access routes for installation. Decide early whether the partition is a fixed element or needs future adaptability, because that changes the connection details to the structure.

Key points to check

Floor levelling and ceiling height tolerances
Glass type and thickness for the required privacy and safety
Door swing, hardware and lock integration
Cable routes and any integrated lighting

How the process works with us

We start with your drawings or photos, then take on-site measurements to confirm the real dimensions. Based on this we prepare a written specification and a drawing for your approval. Once approved, the metalwork is produced in our factory at 37 Rival Street, Tel Aviv, and finished with hot-dip galvanizing or powder coating where the environment requires it. The partitions are then delivered and installed on site.

Finishes and materials

The finish is as important as the profile. Powder coating gives a wide range of colors and a durable surface for interior use. Stainless steel suits high-traffic reception areas and a refined, contemporary look. Galvanized steel is an option where a robust, industrial character is wanted. We can advise which material suits the wear level and the visual intent of the room.

Planning your project with Techno Kol Uzi

Share your floor plan, a few reference images and the intended use of each zone, and we will advise on the most suitable system. Early input from us during the design stage helps avoid clashes with ceilings, services and door positions. For projects with specific standards, such as railing or guarding requirements, we coordinate with your engineer, who confirms the exact values.

Frequently asked questions

Can an interior metal partition be made to a non-standard height?

Yes, partitions are manufactured to measure, so heights and lengths follow the dimensions from your drawings and our site survey. Final dimensions are confirmed before production.

Is a metal office partition soundproof?

Sound performance depends on the infill and the seals used, not only on the frame. Solid or laminated glass with proper perimeter sealing gives the best results, and we can discuss the options for your acoustic target.

Can the partition include a glass door?

Yes, glazed doors can be integrated into the partition system with matching frames and compatible hardware, provided the opening is planned in the design stage.

Which finishes are available for interior screens?

We offer powder-coated colors, brushed or polished stainless steel and galvanized steel. The best choice depends on the wear level of the space and the look you want.

Common mistakes to avoid

A common error is fixing the partition position before checking the ceiling and floor conditions, which leads to costly adjustments on site. Another is choosing glass thickness and seals without considering the acoustic and privacy requirements of each room.

Our recommendation

Involve the metalwork fabricator during schematic design, not only at the detail stage. Early dimensional and finish decisions prevent clashes and keep the partition system consistent across the whole office.

Summary

Interior metal office partitions combine structural clarity with flexible space planning when they are designed and measured correctly from the start.

השאירו פרטים ונחזור אליכם